Kitchen Countertop Remodeling North Miami Beach, FL: Quartz vs. Granite vs. Porcelain

18 Construction Management Group · North Miami Beach Kitchen Countertops

Kitchen Countertop Remodeling North Miami Beach, FL: Quartz vs. Granite vs. Porcelain

Countertops take more daily punishment than almost anything else in a kitchen. Hot pans, citrus, coffee, wet sponges, kids doing homework and the occasional dropped cast iron skillet all land on the same surface. In North Miami Beach, where many homes and bayside condos were built decades ago and still carry laminate, tile or dated granite, the counter is often the first thing owners want to change. Three materials come up in nearly every conversation: engineered quartz, natural granite and large-format porcelain slabs. Each one can look excellent and each one has a weak spot. This guide compares them on durability, heat, stains, seams, edge profiles, weight, maintenance and cost, then walks through what a counter replacement involves in a North Miami Beach house or condo. Every dollar figure is a planning range, not a quote, except where we cite the 2025 Cost vs Value Report for Miami. It is written by 18 Construction Management Group, a remodeling company serving North Miami Beach and nearby communities. You can reach us at (954) 544-0845.

Quartz, granite or porcelain: which countertop fits a North Miami Beach kitchen?

Quartz suits most busy households because it needs no sealing and resists stains, though it dislikes direct heat. Granite handles heat well and gives you one-of-a-kind stone, but most slabs need periodic sealing. Porcelain is thin, heat-tolerant and very stain-resistant, but it chips more easily at edges and needs an experienced fabricator.

As planning ranges, installed quartz often runs about $60 to $150 per square foot, granite about $45 to $150 and porcelain about $70 to $170, depending on the slab, edge, cutouts and access. A typical kitchen has roughly 30 to 55 square feet of counter. These are planning ranges, not quotes. For context, the Journal of Light Construction (JLC) 2025 Cost vs Value Report for Miami lists a minor midrange kitchen remodel in Miami at $29,424, and new counters are usually part of that scope.

Before choosing, look at full slabs in person, decide your edge and sink style, and confirm cabinet condition, because new stone on failing cabinets is money poorly spent.

Local context: 18 Construction Management Group works on kitchens in North Miami Beach and nearby Aventura, North Miami, Sunny Isles Beach, Surfside and Bal Harbour. To talk through a countertop project and get a written estimate, call (954) 544-0845 or view 18 Construction Management Group on Google Maps.

What Are Quartz, Granite and Porcelain Countertops Made Of?

Short answer

Quartz is engineered from crushed quartz and resin, granite is natural quarried stone, and porcelain is fired clay pressed into large thin slabs.

The names get used loosely in showrooms, so it helps to start with what each product actually is.

MaterialWhat it isTypical slab thickness
Engineered quartzCrushed natural quartz bound with polymer resin and pigments, pressed into slabs at a factoryAbout 2 cm or 3 cm
GraniteNatural igneous stone quarried in blocks and sliced into slabs, then polished or honedAbout 2 cm or 3 cm
Porcelain slabRefined clay and minerals pressed and fired at very high temperature into large thin panelsAbout 6 mm to 20 mm, often 12 mm for counters

Quartz is a manufactured product, which is why colors and patterns repeat from slab to slab and why a sample is a fair preview of what you will get. Granite comes out of the ground, so two slabs sold under the same name can look quite different, and the sample in the showroom only hints at the slab you will receive. Porcelain is also manufactured. Its pattern is printed through or on the surface during production, and many lines imitate marble, concrete or stone with surprising realism.

The way each material is made explains most of the trade-offs that follow. Resin makes quartz resistant to stains but sensitive to heat. Natural minerals make granite tolerant of heat but slightly porous. High-temperature firing makes porcelain hard and nearly non-porous, while its thinness makes edges more vulnerable.

You will also hear about “quartzite”, which is a different thing. Quartzite is a natural metamorphic stone, harder than most granite, and it is sometimes confused with engineered quartz because of the name. It behaves more like a natural stone and generally sits at the higher end of pricing. If a supplier shows you quartzite, ask whether it needs sealing and how it was tested for etching, because some stones sold as quartzite are softer marbles.

Solid surface and laminate still appear in some North Miami Beach kitchens, especially rentals. Solid surface can be repaired by sanding out scratches, and modern laminate is far better than older versions. They cost less but handle heat and cuts poorly compared with the three materials in this guide.

How Do Quartz, Granite and Porcelain Compare on Durability, Heat and Stains?

Short answer

Quartz resists stains most reliably and needs no sealing but dislikes heat; granite tolerates heat but needs sealing; porcelain resists both heat and stains but chips more easily at edges.

FactorQuartzGranitePorcelain
Scratch resistanceHighHighVery high on the surface
Heat toleranceModerate; resin can scorch or discolor with hot pansHigh; trivets still recommendedHigh; sudden temperature changes still a concern
Stain resistanceHigh; non-porousGood when sealed; some light slabs absorb oilsVery high; non-porous
SealingNot neededUsually every 1 to 3 years, depending on stoneNot needed
Chip riskLow to moderate at edgesLow to moderate at edgesHigher at edges and corners
UV and sunSome colors can fade or yellow in strong direct sunStableStable
Pattern consistencyVery consistentUnique per slabConsistent; printed veining
WeightHeavyHeavyLighter per square foot at 12 mm

General material behavior. Specific products vary, so check each manufacturer’s care and warranty documents.

None of these materials is fragile in normal use. The differences show up in specific habits. If you tend to set a pot straight from the stove onto the counter, granite or porcelain forgives that more readily than quartz. If your household spills red wine, turmeric or cooking oil and does not wipe it right away, quartz and porcelain are more forgiving than a light, unsealed granite. If you have a kitchen where people bang heavy pots against the counter edge, a thicker quartz or granite edge holds up better than a thin porcelain edge.

Sun matters in North Miami Beach more than many owners expect. Kitchens with large east- or west-facing windows, or condo units with floor-to-ceiling glass facing the bay, can expose part of the counter to strong direct light for hours. Some quartz manufacturers note that their products are intended for indoor use away from prolonged direct sunlight. Check the specific warranty if your counter sits beside a big window.

When Is Quartz the Right Countertop for a North Miami Beach Kitchen?

Short answer

Quartz suits busy kitchens and owners who want consistent color and no sealing. Use trivets, avoid harsh chemicals and check warranty terms if the counter gets strong direct sun.

Quartz has become the default choice in many South Florida kitchens because it is predictable. You choose a color from a sample, and the slab that arrives looks like it. Daily care is soap and water. There is no sealing schedule to remember. For families, rentals and seasonal homes where nobody wants to think about the countertop, that predictability is worth a lot.

  • Consistent color and pattern, so seams and multiple slabs match closely
  • Non-porous surface that resists coffee, wine and oil stains
  • Wide range of whites, grays and marble looks
  • Available in 2 cm and 3 cm thicknesses with many edge profiles
  • Easy routine care with mild soap and water

The weak points are heat and, for some colors, strong sun. The resin binder can scorch, discolor or crack if a very hot pan sits on it, so trivets are part of living with quartz. Harsh chemicals such as oven cleaners or strong solvents can also dull the surface. Read the care sheet from the specific brand, because warranty terms often depend on following it.

There is also a workplace safety topic worth knowing about. Cutting and polishing engineered stone creates fine silica dust, and safety regulators have drawn attention to the risk for fabrication workers. For homeowners, the practical point is that cutting should happen in a fabrication shop with wet cutting and dust controls, and any field cuts in your home should be minimal and done with dust control. Ask your contractor how they handle on-site adjustments.

Quartz is often a good match for North Miami Beach kitchens that are used heavily, for condos where owners want a clean modern white or gray, and for homeowners planning to sell within a few years who want a neutral look buyers recognize.

When Does Granite Make More Sense Than Quartz?

Short answer

Granite fits cooks who want heat tolerance and natural, unique stone, as long as they accept periodic sealing and approve the actual slabs before cutting.

Granite has been in South Florida kitchens for decades, and many North Miami Beach homes still have speckled granite installed in the 1990s or 2000s. That older look has made some owners assume granite is out of style. It is the speckled patterns that have dated. Current granite selections include quieter whites, deep blacks, leathered finishes and dramatic veined slabs that look nothing like the old tan-and-brown counters.

  • Natural stone with movement and color that no two slabs repeat
  • Good heat tolerance for cooks who move pans quickly
  • Hard surface that resists scratches from normal use
  • Polished, honed and leathered finishes
  • Often competitive pricing on common colors

The trade-off is maintenance and variability. Most granite is slightly porous, and lighter colors can absorb oil if they are not sealed. A simple water test tells you a lot: put a few drops of water on the surface, wait 10 to 15 minutes and see whether the stone darkens. If it does, it is due for sealing. Some dense dark granites barely absorb anything and need sealing rarely.

Because every slab is different, you should see and approve the actual slabs that will be cut for your kitchen. Ask the fabricator to show you where seams and cutouts will fall on the slab. A dramatic vein running through the sink cutout or splitting awkwardly at a seam is a disappointment you can avoid by reviewing a layout before cutting.

Granite tends to suit cooks who use high heat, owners who like natural stone and are fine with occasional sealing, and kitchens where the design calls for a one-of-a-kind slab on an island.

What Should North Miami Beach Homeowners Know About Porcelain Slab Countertops?

Short answer

Porcelain resists stains, heat and UV and gives a marble look without marble care, but it needs a skilled fabricator and its thin edges chip more easily.

Porcelain slabs are the newest of the three in most local kitchens. They are large, thin and very dense, which gives them some real advantages. They resist stains, handle heat well, resist UV fading and can be very light per square foot. Many lines are made to look like Calacatta marble or concrete without the etching problems of real marble.

  • Very low porosity, so stains and spills rarely penetrate
  • High heat tolerance, though rapid temperature shocks should still be avoided
  • UV stable, which helps kitchens with big windows
  • Thin profiles for a modern look
  • Matching panels available for backsplashes, islands and even cabinet fronts in some lines

The challenges are mostly about fabrication and edges. Thin porcelain needs careful cutting and handling, and not every countertop shop has the equipment or experience. Edges and corners are more prone to chipping than thicker quartz or granite. Some porcelain has a printed surface pattern that does not run all the way through the body, so a chipped edge may show a different color underneath. Ask whether the line you like has through-body color or a printed surface, and look at a finished mitered edge sample before ordering.

Porcelain often works well in modern North Miami Beach condos, on kitchens with full-height matching backsplashes and in homes where the owner wants the marble look without marble maintenance. It is a weaker match for households that are hard on edges or for buyers who have not found an experienced porcelain fabricator.

How Much Do Quartz, Granite and Porcelain Countertops Cost in North Miami Beach?

Short answer

Planning ranges run about $45 to $150 per square foot for granite, $60 to $150 for quartz and $70 to $170 for porcelain, plus edges, cutouts, removal and plumbing.

MaterialPlanning range per sq ft, installedTypical 30 to 55 sq ft kitchen
Laminate (for comparison)About $25 to $60About $750 to $3,300
Granite, common colorsAbout $45 to $80About $1,400 to $4,400
Granite, premium or exoticAbout $80 to $150 or moreAbout $2,400 to $8,300 or more
Quartz, entry to mid linesAbout $60 to $100About $1,800 to $5,500
Quartz, premium designer linesAbout $100 to $150 or moreAbout $3,000 to $8,300 or more
Porcelain slabAbout $70 to $170About $2,100 to $9,400

Planning ranges, not quotes or published statistics. Totals exclude cabinet work, plumbing and backsplash unless noted.

The material is only part of the bill. A counter price usually bundles the slab, templating, fabrication, edge profile, sink and cooktop cutouts, delivery and installation. Extras that commonly change the number include a thicker or mitered edge, a waterfall end on an island, an undermount sink, full-height backsplash slabs, removal of old stone and work in a high-rise where crews must use a service elevator.

Common add-onPlanning range
Remove and dispose of old countersAbout $200 to $800
Undermount sink cutout and polishAbout $150 to $400 per cutout
Cooktop or faucet holesAbout $50 to $250 each
Mitered or thick built-up edgeAbout $20 to $60 per linear foot
Waterfall end panelAbout $1,000 to $3,500 each
Full-height slab backsplashAbout $40 to $120 per sq ft
Plumber disconnect and reconnectAbout $250 to $700

Planning ranges, not quotes.

Quick math helps. Measure each counter run along the wall in inches, multiply by the depth (usually about 25 to 26 inches) and divide by 144 for square feet. Add the island separately. Multiply your total by the per-foot range for the material you like, then add the extras that apply. The result is a planning figure to compare against written estimates.

Ask whether a quote is per square foot of slab purchased or per square foot of finished counter. Granite and some porcelain are sold by the full slab, so a small kitchen that needs just over one slab may pay for two. Quartz is often priced the same way. Knowing how the number was built avoids surprises when estimates are compared.

What Do Miami Cost vs Value Figures Say About Countertop Projects?

Short answer

The 2025 report lists Miami at $29,424 for a minor midrange kitchen remodel, $83,468 for a major midrange remodel and $165,416 for upscale. It does not price counters alone.

Project (2025 Cost vs Value)Miami job costHow countertops fit
Minor kitchen remodel, midrange$29,424New laminate counters with refaced cabinets, sink, faucet, appliances and flooring in the model
Major kitchen remodel, midrange$83,468New counters as part of a full layout and cabinet remodel
Major kitchen remodel, upscale$165,416Premium stone counters in a larger high-end kitchen

Source: JLC 2025 Cost vs Value Report, Miami, Florida (accessed 2026). Model-project averages, not quotes.

The report does not price a countertop-only project, so there is no public Miami figure for swapping counters alone. The models do show where counters sit inside bigger jobs. The minor remodel uses laminate, which tells you that a stone upgrade adds to that model cost. Treat resale percentages in the report as averages for model projects, not a forecast for your home. For complete kitchen budgets, see How Much Does a Kitchen Remodel Cost in North Miami Beach, FL?.

Which Edge Profiles and Thicknesses Suit Each Material?

Short answer

Eased, bevel and bullnose edges are practical for all three materials; mitered edges make thin porcelain look thick. Ask about overhang support before planning island seating.

The edge is where a counter gets bumped, leaned on and wiped. It also shapes the look of the kitchen more than people expect.

Edge profileLookWorks well withNotes
Eased or slightly rounded squareClean, modernQuartz, granite, porcelainMost common; a small radius resists chipping better than a sharp corner
BevelCrisp, slightly traditionalQuartz, graniteHides small chips better than a square edge
Bullnose or half bullnoseSoft, roundedQuartz, graniteFriendly for families with small children
OgeeDecorative, traditionalGranite, some quartzHigher fabrication cost
Mitered thick edgeLooks like a thick solid slabQuartz, porcelain, graniteCommon way to make porcelain look substantial; joint must be tight

Quartz and granite usually come in 2 cm or 3 cm slabs. A 3 cm slab can often span cabinets without a plywood sub-top and resists flexing at overhangs. A 2 cm slab is lighter and sometimes cheaper, and it may be installed on a sub-top or with a built-up edge to look thicker. Porcelain is thinner still, so most installers either use a mitered edge to create the look of thickness or keep the thin profile on purpose for a minimal design.

Seating overhangs need support. As a general guide, larger overhangs on islands require brackets or steel supports concealed under the counter, and porcelain generally needs more support than thick stone. Ask the fabricator for their overhang limits for your specific slab before you plan bar seating.

How Are Seams Planned, and Can You Hide Them?

Short answer

Plan seam locations before cutting, keep them away from the sink and cooktop, ask for vein matching, and confirm large slabs can reach a condo unit.

Most kitchens need at least one seam, especially L-shaped and U-shaped layouts or long islands. A good seam is tight, level, color-matched with epoxy and placed where it is least visible.

  • Ask where each seam will fall before fabrication
  • Avoid seams in front of the sink or cooktop, where water and heat stress the joint
  • With veined materials, ask for vein matching across the seam
  • On islands, a single slab avoids seams entirely if the size and access allow it
  • In condos, slab size may be limited by the service elevator and hallway turns

Jumbo slabs reduce seams but can be hard to deliver to upper floors in North Miami Beach and Sunny Isles Beach towers. Before falling in love with a seamless 10-foot island, confirm that the slab can physically reach the unit. Elevator cab dimensions and door heights decide this, and building managers can usually tell you the measurements.

Modern fabrication shops often produce a digital layout that overlays your counter outline on photos of the actual slab. If yours offers it, use it. You can move a seam a few inches or shift the island piece to capture the part of the slab you like most.

How Do Sink Style and Cutouts Affect the Countertop?

Short answer

Choose the sink and faucet before templating. Undermount sinks are common with all three materials, and the sink base cabinet should be checked and repaired while the old counter is off.

Countertop replacement is the natural moment to change the sink, and the sink choice affects the counter fabrication.

Sink typeFit with the three materialsConsiderations
UndermountCommon with quartz, granite and porcelainPolished cutout edge; clean wiping straight into the bowl
Drop-in or top mountWorks with all threeSimpler, but the rim collects grime
Farmhouse or apron frontWorks with all threeUsually needs a modified sink base cabinet
Integrated porcelain or quartz sinkSome product linesSeamless look; limited sizes

Decide the sink and faucet before templating, because the fabricator needs the actual sink, or at least its exact template, to cut the opening. Faucet holes, soap dispensers, filtered water taps and air switches for disposals each need a hole in the right place. If you plan a cooktop, have its cutout specifications ready as well.

Check the sink base cabinet while the old counter is off. Water stains, soft floors or swollen panels in the sink base are common in older North Miami Beach kitchens and should be repaired before new stone goes on top. Our Kitchen Cabinet Remodeling North Miami Beach, FL: Replace, Reface or Refinish? guide explains how to judge whether cabinet boxes are worth keeping.

Are Your Cabinets Ready to Carry New Stone or Porcelain Countertops?

Short answer

Counters need level, sound cabinets. Repair or replace damaged boxes first, and template only after any new cabinets are installed.

New counters sit on your existing cabinets unless you are replacing those too. A heavy 3 cm slab placed on racked or water-damaged boxes can crack or settle, and fixing it afterwards means removing the counter.

  • Cabinets level and square, with no gaps at the wall
  • Sink base floor dry and firm
  • Boxes securely fastened to each other and to the wall
  • No sagging where the dishwasher opening spans
  • Plan for any cabinet refacing or refinishing before counters go on

Order matters. If cabinets are being refaced or refinished, that work usually happens before or alongside counter installation, with the crew protecting the new tops. If cabinets are being replaced, counters are templated only after the new cabinets are installed and leveled. Templating on old cabinets that will later be replaced is a common and costly mistake.

The NKBA Kitchen & Bath Planning Guidelines publish kitchen planning guidelines that cover counter landing space beside sinks, cooktops and refrigerators, which helps if you are using the counter replacement to add a section or rethink an island.

What Changes When You Replace Countertops in a North Miami Beach Condo?

Short answer

Expect an association application, scheduled elevator use, slab size limits, insurance certificates and dust rules. Check the documents before ordering.

Many North Miami Beach kitchens sit inside condominium buildings along Biscayne Bay and near the beach corridor. A counter swap there involves the association as well as the kitchen.

1

Read the alteration rules

Many associations require an application before any work, even a counter replacement. Florida’s Florida Statutes section 718.113 (The Florida Senate) addresses material alterations and association approval.

2

Confirm work hours and elevator booking

Stone and porcelain arrive on carts and need padded service elevators reserved in advance.

3

Check slab size against the elevator

Measure the elevator cab diagonal and door height before choosing a jumbo slab.

4

Provide insurance certificates

Buildings often require proof of contractor insurance before crews enter.

5

Plan cutting and dust

Most cutting should happen at the shop. Ask about dust control for any field adjustments.

The Florida DBPR Division of Florida Condominiums, Timeshares and Mobile Homes provides general resources for condominium owners. Your association documents control the specific rules, so request them early. Approval timelines can add a few weeks to the project before any work starts.

How Do Humidity and Salt Air Affect Countertop Choices Near the Bay?

Short answer

The counters themselves handle humidity well. Focus on sealing the backsplash joint and sink, keeping granite sealed and fixing leaks under the sink.

The counter materials themselves handle South Florida humidity well. Quartz and porcelain are essentially non-porous, and sealed granite resists moisture. The problems in humid coastal kitchens tend to show up around the counter, at the sink base, the backsplash joint and the hardware.

  • Seal the backsplash joint with a quality silicone so water does not run behind it
  • Use a properly sealed undermount sink and check the clips over time
  • Keep sealing granite on schedule, especially near the sink
  • Fix slow drips quickly; standing water inside the sink base feeds mold
  • Run the range hood and air conditioning to manage indoor humidity

The EPA’s Brief Guide to Mold, Moisture and Your Home explains how indoor moisture leads to mold and why controlling leaks and humidity matters. For seasonal residents, leaving the air conditioning set to control humidity while away protects cabinets under the counters as much as the counters themselves.

What Happens During a Countertop Replacement, From Template to Install?

Short answer

Choose and approve material, finalize cabinets and sink, template, fabricate for about one to three weeks, then remove, install and reconnect, usually over one to three days on site.

1

Select material and see slabs

Choose the material, color and finish, and for granite approve the actual slabs.

2

Confirm sink, faucet and appliances

Have the sink model and cooktop specs ready for templating.

3

Prepare cabinets

Complete repairs, leveling or cabinet work before templating.

4

Template

A technician measures digitally or with physical templates once cabinets are final.

5

Fabrication

The shop cuts, edges and polishes the pieces. This often takes about one to three weeks.

6

Removal

On install day, the plumber disconnects the sink and the old counter is removed.

7

Installation

Pieces are set, seams are joined and leveled, and the sink is attached.

8

Reconnect and seal

The plumber reconnects the sink and faucet, and joints are caulked; granite is sealed if needed.

The kitchen is usually out of service for only one to three days around removal and installation, but the full process from selection to finished counters often runs about two to five weeks. Backsplash tile typically goes in after the counters are set, adding a few more days.

Want a Second Opinion on Your Countertop Choice?

Bring your measurements, a photo of your kitchen and the slabs you like. 18 Construction Management Group can review the cabinets underneath, the sink and edge choices, and give you a written estimate for the material you pick. Call (954) 544-0845.

How Long Does Countertop Remodeling Take in North Miami Beach?

Short answer

From selection to finished counters often takes about two to five weeks, with one to three days of on-site disruption. Condo approvals and cabinet work can add time.

StagePlanning duration
Selection and slab approvalAbout 1 to 2 weeks
Condo approval, if requiredAbout 1 to 4 weeks
Cabinet repair or replacement, if neededDays to several weeks
Template to installAbout 1 to 3 weeks
Removal and installation on siteAbout 1 to 3 days
Backsplash after countersAbout 2 to 5 days

Typical planning durations, not a fixed schedule.

Delays tend to come from three places: waiting on a sink or faucet that was not ordered early, a condo approval that sits in a board meeting queue, and slab availability for a specific color. Ordering fixtures early and picking a second-choice slab color are simple ways to keep the schedule.

Do You Need a Permit to Replace Kitchen Countertops in North Miami Beach?

Short answer

A like-for-like counter swap often needs no permit, but moving plumbing, gas or electrical usually does. Confirm with the building department for your address.

A straight countertop swap that keeps the sink and cooktop in the same place often does not require a building permit, but the answer depends on the full scope. Moving the sink, adding a new circuit for an island, relocating a gas cooktop or changing walls usually brings permit requirements. Rules can also differ between the City of North Miami Beach and unincorporated Miami-Dade County.

  • Confirm requirements with the building department for your address before work
  • Review the Miami-Dade County homeowner permit information for general guidance
  • Ask your contractor which parts of the scope need permits and who pulls them
  • In condos, association approval is separate from any building permit

Statewide code requirements come from the Florida Building Code Online. For bigger kitchen jobs, Florida’s Florida Statutes section 713.13, notice of commencement (The Florida Senate) explains when a notice of commencement must be recorded. If your contractor tells you no permit is needed, ask why in writing, especially if plumbing or electrical is changing.

Should You Schedule Countertop Work Around Hurricane Season?

Short answer

Allow cushion from June through November because storms can delay deliveries and installers. Ask how the site is secured if a storm threatens mid-project.

Atlantic hurricane season runs from June through November. Countertop work is short on site, but storms can delay slab deliveries, close fabrication shops for a few days and push back installers who are busy with emergency repairs. Plan a little cushion during those months and avoid booking installation the week before a trip or a family event. Ready.gov hurricane preparedness guidance offers general preparedness guidance if a storm threatens while your kitchen is mid-project.

If a storm approaches after the old counters are removed, ask the contractor how they secure the site: plumbing capped, sink base protected and loose materials stored safely. That is a short conversation that prevents a lot of stress.

How Should You Pair a Backsplash With Quartz, Granite or Porcelain?

Short answer

Plan the backsplash with the counter. Calm tile suits busy granite, while veined quartz or porcelain often looks good as a full-height slab.

The backsplash is usually installed after the counters and sits right on top of them, so plan both at once.

Backsplash optionPairs well withNotes
Ceramic or porcelain tileAll threeWidest choice; grout lines need sealing or a stain-resistant grout
Short stone splash (about 4 inches)Quartz, graniteUses offcuts from the slab; lower cost; dated look in some kitchens
Full-height slabQuartz, porcelain, some graniteSeamless and easy to clean; higher cost
Glass tileQuartz, porcelainReflects light in small kitchens

Busy granite usually looks better with a calm tile. Strongly veined quartz or porcelain often looks good as a full-height slab, so the veining continues up the wall. If you choose tile, bring a counter sample to the tile showroom. Undertones that look similar on a phone screen can clash in a North Miami Beach kitchen with bright morning light.

How Do You Care for Quartz, Granite and Porcelain Countertops?

Short answer

Clean all three with mild soap and water, use trivets and boards, avoid harsh chemicals, and seal granite about every one to three years.

TaskQuartzGranitePorcelain
Daily cleaningMild soap and waterMild pH-neutral cleanerMild soap and water
AvoidHot pans, oven cleaner, strong solventsAcidic or abrasive cleaners on polished finishesHard impacts at edges, cutting directly on surface
SealingNoneUsually every 1 to 3 years; test with water dropsNone
Stain responseWipe promptly; most stains liftPoultice for oil stainsMost stains wipe off
Chip repairResin fill by a fabricatorResin fill by a fabricatorHarder to hide; color-matched repair

Cutting boards protect knives and surfaces alike. Trivets protect quartz from heat and protect all three from thermal shock. For granite, keep a bottle of a stone-safe cleaner under the sink rather than an all-purpose spray with bleach or vinegar, which can wear down sealers over time.

Keep the care sheet and warranty registration from the fabricator in a kitchen drawer. If a problem appears years later, the product name, color and lot number make a matching repair far easier.

Which Countertop Fits Common North Miami Beach Kitchen Scenarios?

Short answer

Quartz suits busy families and rentals, granite or porcelain suits hot-pan cooks and sunny condos, and neutral quartz or quiet granite suits owners selling soon.

Busy family kitchen

Quartz in a mid-tone or patterned color hides crumbs and resists stains. Use trivets near the range.

Serious home cook

Granite or porcelain near the cooktop handles hot pans better. A quartz island can still work.

Bayside condo with big windows

Porcelain or granite avoids sun-related fading worries. Confirm slab size fits the elevator.

Selling within two years

A neutral quartz or a quiet granite gives buyers a clean look without premium pricing.

Marble look without marble care

Porcelain or a marble-look quartz. Ask about through-body color for porcelain.

Rental or seasonal home

Quartz needs the least ongoing care and no sealing schedule.

These are starting points. Your cooking habits, light and cabinet condition decide the final choice.

Do Countertop Choices Differ Across North Miami Beach and Nearby Communities?

Short answer

Single-family homes often need cabinet repairs first, high-rise condos are shaped by slab size and building rules, and oceanfront units should consider sun and glare.

The materials are the same everywhere, but the typical project changes. In North Miami Beach and North Miami single-family homes, many projects replace older granite or tile, and cabinets under them often need attention first. In Aventura and Sunny Isles Beach high-rises, slab size, elevator logistics and association rules shape the choice more than anything else. In Surfside and Bal Harbour, large windows and ocean light make UV stability and glare from polished finishes worth considering.

There is no reliable public data comparing countertop prices by city, so use planning ranges and a written estimate. For local service details, see Kitchen and Bathroom Remodeling in North Miami Beach, FL, Kitchen and Bathroom Remodeling in North Miami, FL, Kitchen and Bathroom Remodeling in Sunny Isles Beach, FL, Kitchen and Bathroom Remodeling in Surfside and Bal Harbour, FL and Kitchen Cabinet and Countertop Upgrades Aventura FL.

How Do You Choose a Countertop Contractor in North Miami Beach?

Short answer

Verify licensing, review Miami-Dade hiring guidance, confirm fabrication experience with your material, approve slabs and seams, and get every item in writing.

  • Verify any contractor’s license through the Florida DBPR license search
  • Review the Miami-Dade County guidance on hiring contractors
  • Ask who fabricates and who installs, and whether the shop has experience with porcelain if you choose it
  • Ask to see the actual slabs and a seam layout before cutting
  • Confirm who handles plumbing disconnect and reconnect
  • Get the scope, edge, cutouts, removal and backsplash in writing

Florida’s Florida Statutes section 489.128 (The Florida Senate) addresses contracts with unlicensed contractors. Countertop installation itself is sometimes done by specialty fabricators, while plumbing, electrical and cabinet work fall under other trades. A remodeling contractor coordinating the whole kitchen keeps those pieces in the right order.

What Should a Countertop Estimate Include?

Short answer

It should list material and thickness, square footage, edge, cutouts, removal, plumbing, cabinet work, seams, schedule and payment terms.

LineWhat to look for
MaterialBrand, color, thickness and finish, or slab lot for granite
Square footageMeasured area, including island and backsplash if slab
EdgeProfile and any mitered or built-up edges
CutoutsSink, cooktop, faucet and accessory holes
RemovalDisposal of old counters and backsplash
PlumbingDisconnect, reconnect, new supply lines
Cabinet workRepairs, leveling or support brackets
SeamsNumber and approximate location
ScheduleTemplate date, fabrication time and install date
PaymentsDeposit and balance terms

When two estimates differ a lot, the gap usually sits in slab grade, edge work, removal and plumbing. Ask each contractor to price the same material and edge so you can compare like with like. Our Kitchen Remodeling Hallandale Beach, FL: What Should Be Included in an Estimate? guide covers estimate review in more detail.

How Can You Save on Countertops Without Cutting Corners?

Short answer

Pick a standard color, keep the layout, choose a simple edge, use remnants for small areas and coordinate the whole kitchen in one project.

1

Choose a standard color

Popular quartz and granite colors are often priced lower than designer lines.

2

Keep the layout

Leaving the sink and cooktop in place avoids plumbing and permit costs.

3

Pick a simple edge

An eased edge costs less than an ogee or mitered edge.

4

Use remnants for small areas

Bathroom vanities or a small bar top can come from remnant pieces.

5

Bundle with other work

Doing cabinets, counters and backsplash in one coordinated project avoids return trips.

Avoid saving on support, sealing and plumbing. An unsupported overhang that cracks or a sink that was reattached poorly costs more to repair than the original saving.

Quartz vs. Granite vs. Porcelain: Which Should You Choose?

Short answer

Quartz for easy care and consistent color, granite for heat and natural stone, porcelain for heat, stains and sun with a marble look. Mixing materials is also an option.

If you care most aboutLean toward
No sealing and stain resistanceQuartz or porcelain
Heat toleranceGranite or porcelain
One-of-a-kind natural stoneGranite
Marble look with low maintenancePorcelain or marble-look quartz
Durable edges in a busy kitchenQuartz or granite
Sunny window or bayside glassPorcelain or granite
Consistent color across seamsQuartz

Many kitchens mix materials. A quartz perimeter with a granite or porcelain island, or porcelain near the range with quartz elsewhere, can give you the strengths of each where they matter most.

What Countertop Myths Do North Miami Beach Homeowners Hear?

Short answer

Common myths: quartz is indestructible, granite always stains, porcelain is just big tile, thicker is always better, any cabinet can carry stone, and Cost vs Value figures are quotes.

1

Myth: Quartz is indestructible

It resists stains and scratches well, but direct heat and harsh chemicals can damage the resin.

2

Myth: Granite always stains

Sealed granite resists most stains, and many dark granites absorb very little.

3

Myth: Porcelain is just big tile

Porcelain slabs are made for counters, but they need slab-specific fabrication and support.

4

Myth: Thicker is always better

A 3 cm slab resists flex, but a 2 cm slab on proper support performs well and weighs less.

5

Myth: Countertops can go on any cabinets

Damaged or out-of-level cabinets can crack new stone.

6

Myth: Cost vs Value figures are countertop quotes

They are model-project averages and do not price counters alone.

A Remodeling Company Serving North Miami Beach Homeowners

18 Construction Kitchen and Bathroom Remodel Management Group LLC, known as 18 Construction Management Group, is a kitchen and bathroom remodeling and project management company serving North Miami Beach, Aventura, Sunny Isles Beach, North Miami, Golden Beach, Hallandale Beach and the wider Miami-Dade and Broward coast. If you are choosing new countertops, it is a local remodeling company you can call and compare alongside others.

Kitchen services include full kitchen remodeling, countertop replacement, cabinet refinishing, refacing and replacement, backsplash, lighting and layout changes, with project management to coordinate fabricators, plumbers and electricians. The company also handles bathroom remodeling.

Phone: (954) 544-0845
Website: 18projectsm.com
Service areas: Aventura, Sunny Isles Beach, Golden Beach, North Miami Beach, Hallandale Beach, Hollywood, North Miami, Miami Beach
Google Business Profile: View on Google Maps

18 Construction Management Group is a service-area business, so the team comes to you. Call to talk through your counters and ask for a written estimate that lists material, edge and cutouts.

Frequently Asked Questions About Countertop Remodeling in North Miami Beach

Is quartz or granite better for a North Miami Beach kitchen?

Quartz suits owners who want no sealing and strong stain resistance. Granite suits cooks who want heat tolerance and natural stone and accept periodic sealing.

Is porcelain a good countertop material?

Yes, when an experienced fabricator handles it. It resists heat, stains and UV, but its thin edges chip more easily than quartz or granite.

How much do quartz countertops cost in North Miami Beach?

A planning range is about $60 to $150 per square foot installed, depending on the line, edge and cutouts.

How much do granite countertops cost?

A planning range is about $45 to $80 per square foot for common colors and about $80 to $150 or more for premium slabs, installed.

How much do porcelain slab countertops cost?

A planning range is about $70 to $170 per square foot installed, depending on the product and edge work.

Does granite need sealing?

Most granite benefits from sealing about every one to three years. Put a few drops of water on the stone; if it darkens within 10 to 15 minutes, it is time to seal.

Can you put hot pans on quartz?

It is safer not to. The resin in quartz can scorch or discolor with high heat, so use trivets.

How long does countertop replacement take?

From selection to installation often takes about two to five weeks, with one to three days of disruption on site.

Do I need a permit to replace countertops in North Miami Beach?

A like-for-like swap often does not, but moving plumbing, gas or electrical usually does. Confirm with the building department for your address.

Can large slabs fit in a condo elevator?

Not always. Measure the elevator cab and door before choosing a jumbo slab, and ask the building manager about service elevator rules.

Can I keep my cabinets when I replace countertops?

Often yes, if the boxes are level, sound and dry. Repair or replace damaged cabinets before templating.

What does the Cost vs Value Report say about Miami kitchens?

The 2025 report lists Miami at $29,424 for a minor midrange kitchen remodel, $83,468 for a major midrange remodel and $165,416 for an upscale remodel. It does not price counters alone.

Does 18 Construction Management Group publish fixed countertop prices?

No. The figures in this guide are educational planning ranges. To request a written estimate, call 18 Construction Management Group at (954) 544-0845.

Find 18 Construction Management Group Near North Miami Beach on Google Maps

18 Construction Management Group is a service-area remodeling business. The map below shows the Google Business Profile; there is no showroom address to visit, so the easiest way to start is to call (954) 544-0845.

Open the 18 Construction Management Group Google Business Profile

Ready to Choose Your North Miami Beach Countertops?

Measure your counters, look at full slabs in person and check the cabinets underneath. Then call 18 Construction Management Group at (954) 544-0845 to request a written estimate.

Call (954) 544-0845View on Google Maps

18 Construction Management Group · Serving Aventura, Sunny Isles Beach, Golden Beach, North Miami Beach, Hallandale Beach, Hollywood, North Miami, Miami Beach

Scroll to Top