Remodeled walk-in shower with frameless glass, porcelain tile, niche and linear drain in a Hallandale Beach, Florida bathroom, illustrating walk-in shower remodeling

18 Construction Management Group · Hallandale Beach Walk-In Showers

Walk-In Shower Remodeling Hallandale Beach, FL: Complete Homeowner Guide

A walk-in shower is one of the most requested bathroom upgrades in Hallandale Beach. Owners want an open, easy-to-clean shower in place of a dated tub or a cramped stall, and many want a design that will still work comfortably as they get older. Getting there takes more than choosing tile and glass. A walk-in shower depends on a correctly sloped floor, a waterproofing system that keeps water out of walls and slabs, the right drain and entry for the room, a valve that holds temperature steadily, and ventilation that handles South Florida humidity. In Hallandale Beach, permitted plumbing work goes through the City of Hallandale Beach Building Division, and many showers are in condominium buildings with their own approval rules. This guide covers the decisions in order: shower types and sizes, curb or curbless entry, drains, waterproofing, tile, glass, fixtures, accessibility, permits, condo considerations, timelines, planning costs anchored to the 2025 Cost vs Value Report for Miami, and what a complete estimate should include. Every dollar figure is a planning range, not a quote. It is written by 18 Construction Management Group, a remodeling company serving Hallandale Beach, Golden Beach, Aventura and nearby communities, to help you plan before requesting estimates, including from us at (954) 544-0845.

What do you need to know about walk-in shower remodeling in Hallandale Beach, FL?

A successful walk-in shower comes down to slope, waterproofing, drain and entry choices that fit your floor, a good valve and glass, and steady ventilation. Many Hallandale Beach walk-in shower projects fall roughly between $12,000 and $35,000 depending on size, tile and glass, with larger primary-bath showers going higher. These are planning ranges, not a quote.

For a published anchor, the Journal of Light Construction (JLC) 2025 Cost vs Value Report for Miami lists a midrange bathroom remodel in Miami at $25,565, a universal-design bathroom remodel at $40,234 and an upscale bathroom remodel at $79,971. A walk-in shower is usually one part of those scopes, so the figures help you judge whether a full-bathroom proposal is realistic.

Most problems with walk-in showers are hidden: water escaping because the floor was not sloped correctly, leaks at niches or valve openings, glass that splashes because the shower is too shallow, or mildew because the fan is too weak. Planning those details first matters more than the finish choices.

Local context: 18 Construction Management Group is a remodeling company serving Hallandale Beach and nearby Golden Beach, Aventura, Sunny Isles Beach and Hollywood. To talk through your shower and get a written estimate, call (954) 544-0845 or view 18 Construction Management Group on Google Maps.

What Is a Walk-In Shower Remodel in Hallandale Beach?

Short answer

It usually means removing an old tub or shower and rebuilding the floor slope, waterproofing, drain, valve, tile and glass so you can step in without climbing over a tub wall.

A walk-in shower is a shower you step into without climbing over a tub wall. It may have a low curb, no curb at all, a single fixed glass panel or a hinged door. A walk-in shower remodel usually means removing an old tub, fiberglass stall or tiled shower down to the framing or masonry, then rebuilding the shower floor, waterproofing, tile, valve, drain and glass.

Tub-to-shower conversion

The tub is removed and a tiled shower is built in its space, often the most common project in guest baths.

Shower replacement

An old tiled or fiberglass shower is rebuilt with modern waterproofing, tile and glass.

Shower enlargement

The shower grows into unused space, such as a removed tub deck or linen closet, where layout allows.

In Hallandale Beach, these projects happen in single-family homes, townhomes and many condominium units. The core construction is similar, but condos add association approval and limits on moving drains. A walk-in shower can be one part of a full bathroom remodel or a focused project on its own. Our walk-in shower conversion in Hallandale Beach service page describes the work we offer.

What Types of Walk-In Showers Work in Hallandale Beach Homes?

Short answer

Alcove, corner, open doorless, wet-room and curbless showers all work. Alcoves suit former tub spaces, while doorless and wet-room designs need more room to contain splash.

The right type depends on the size of the bathroom, where the drain can go and how you want the room to feel.

TypeHow it worksGood fit for
Alcove walk-inThree tiled walls with glass across the frontFormer tub alcoves in guest and hall baths
Corner or neo-angleTwo walls with angled glassSmaller bathrooms where floor space is tight
Open or doorlessFixed glass panel; no door, larger footprintPrimary baths with enough length to contain splash
Wet roomShower and freestanding tub share a waterproofed zone behind glassLarger primary baths
CurblessFloor flows into the shower without a stepAccessibility goals where the floor can be built for it

Doorless designs look open but need enough depth, often more than a typical alcove, to keep water inside. If space is limited, a hinged or sliding door is usually more practical than a fixed panel. The NKBA Kitchen & Bath Planning Guidelines publish recommended shower sizes and clearances that help you compare options.

What Do Miami Cost vs Value Figures Say About Walk-In Shower Projects?

Short answer

The 2025 report lists Miami at $25,565 for a midrange bath remodel, $40,234 for universal design and $79,971 for an upscale remodel. A walk-in shower is usually one part of those scopes.

The Journal of Light Construction (JLC) 2025 Cost vs Value Report for Miami does not price a walk-in shower by itself, but its Miami bathroom projects show what complete bathroom scopes cost in South Florida.

Project (2025 Cost vs Value)Miami job costModel scope at a high level
Bath remodel, midrange$25,565Update a 5×7 ft bathroom with new tub and tile surround, toilet, vanity top and tile floor
Bath remodel, universal design$40,234An accessibility-focused bathroom remodel for people of different ages and abilities
Bath remodel, upscale$79,971Expand to about 100 sq ft with a tiled shower and frameless glass, soaker tub, stone counter and custom cabinetry

Source: JLC 2025 Cost vs Value Report, Miami, Florida (accessed 2026). Model-project averages, not quotes and not 18 Construction Management Group prices.

A walk-in shower is part of the upscale and universal-design models and can replace the tub in the midrange model. Use these as reality checks: a full bathroom proposal with a large tiled walk-in shower priced far below the midrange figure is probably missing scope. The report also estimates resale value recouped for each model; those are averages, not a prediction for any specific home. For more bathroom cost context, see How Much Does a Bathroom Remodel Cost in Hallandale Beach, FL?.

How Much Does a Walk-In Shower Remodel Cost in Hallandale Beach?

Short answer

Planning ranges: about $10,000 to $20,000 for a refresh, $15,000 to $35,000 for a tub-to-shower conversion, $25,000 to $50,000 or more for a large primary shower and $20,000 to $45,000 or more for curbless.

The table below converts published data and common local choices into planning ranges. These are general planning estimates, not published statistics and not prices from 18 Construction Management Group.

ProjectWhat it usually includesPlanning range
Shower refreshNew tile and glass over a rebuilt waterproofing system in the same footprintAbout $10,000 to $20,000
Tub-to-shower conversionRemove tub, build sloped floor and waterproofing, tile, valve, glassAbout $15,000 to $35,000
Large primary walk-in showerBigger footprint, bench or niches, larger tile, frameless glass, multiple headsAbout $25,000 to $50,000 or more
Curbless showerFloor modifications for a level entry, linear drain, waterproofing beyond the showerAbout $20,000 to $45,000 or more
Shower as part of full bath remodelShower plus vanity, toilet, flooring, lighting and ventilationAbout $25,000 to $60,000 or more

Planning ranges only. Real costs depend on size, selections, existing conditions, building rules and scope.

Plan a contingency of about 10 to 20 percent. Older homes and buildings in Hallandale Beach often hide deteriorated drains, corroded valves or past water damage that only appear once the old tub or shower comes out.

What Drives Walk-In Shower Costs in Hallandale Beach?

Short answer

Size, drain and floor changes, tile choice, glass type, valve and fixtures, niches and benches, existing conditions and condo logistics drive cost.

1

Size and layout

Larger showers need more tile, waterproofing, glass and labor.

2

Floor and drain changes

Moving a drain or building a curbless entry adds plumbing and floor work.

3

Tile choice and pattern

Large-format porcelain, natural stone and complex patterns take more labor.

4

Glass

Heavy frameless glass and custom panels cost more than framed doors.

5

Valve and fixtures

Thermostatic valves, body sprays and handheld showers add parts and rough-in time.

6

Niches and benches

Each adds framing, waterproofing details and tile cuts.

7

Existing conditions

Mortar beds, damaged subfloors or old pipes increase demolition and repair.

8

Condo logistics

Approvals, work hours and elevator scheduling add time.

When proposals differ widely, check these items first. A lower total often means a smaller glass allowance, a basic valve, or no plan for hidden conditions.

Should You Convert a Tub to a Walk-In Shower in Hallandale Beach?

Short answer

Convert when the tub is rarely used and stepping over it is hard. Keep a tub if you bathe children or it is the home’s only tub and resale matters to you.

Many owners convert a rarely used tub into a larger, easier-to-enter shower. It is a sensible choice when the household showers daily and no one depends on a tub for bathing children or soaking.

Consider converting ifConsider keeping a tub if
No one in the home uses the tubYou bathe young children or pets
Stepping over the tub wall is difficultIt is the only tub and resale buyers may expect one
You want more shower space and storageA soaker tub is part of how you relax
The tub is worn or leakingThe bathroom is large enough for both

If the home has another tub, converting one bathroom is usually low risk. For a full comparison, see Bathroom Remodeling Golden Beach, FL: Walk-In Shower vs. Bathtub. Our tub-to-shower conversion in Hallandale Beach page describes the service.

How Big Should a Walk-In Shower Be?

Short answer

A tub alcove conversion is usually about 60 by 30 to 36 inches. Primary showers are often 48 to 72 inches long and 36 to 48 inches deep, with more depth for doorless designs.

Size depends on the room, the entry style and who uses the shower. A former tub alcove is usually about 60 inches long and 30 to 32 inches deep, which makes a comfortable shower with a door or partial glass panel.

  • A typical tub alcove conversion: about 60 by 30 to 36 inches
  • Comfortable primary shower: about 48 to 72 inches long and 36 to 48 inches deep
  • Doorless designs: more depth helps keep splash inside
  • Bench seating: allow space so knees do not hit the glass
  • Accessible showers: allow room for a seat and a helper where needed

The NKBA Kitchen & Bath Planning Guidelines recommend minimum interior shower dimensions and clearances in front of the shower. Those guidelines help prevent a shower that looks good in a drawing but feels cramped in daily use.

Curb, Low Curb or Curbless: Which Shower Entry Fits Your Hallandale Beach Bathroom?

Short answer

A standard curb is simplest, a low curb is easier to step over, and curbless gives the most open access but requires floor changes that can be difficult on slabs and in condos.

EntryProsCons
Standard curbSimple to build, contains water well, works on most floorsStep-over height
Low-profile curbEasier to step over, still contains waterNeeds careful slope planning
CurblessOpen look, easiest accessNeeds a recessed or raised floor plan and more waterproofing

Curbless showers require the shower floor to sit lower than the bathroom floor. On a wood-framed floor that may mean adjusting framing. On a concrete slab, which is common in Hallandale Beach homes and condos, it may mean recessing the slab, which is often restricted in condos, or raising the rest of the bathroom floor. A low-profile curb is a practical compromise in many bathrooms.

Center Drain or Linear Drain: Which Is Right for Your Walk-In Shower?

Short answer

Center drains suit mosaic floors and often reuse the existing location. Linear drains allow one-way slope and large tile and help low-curb or curbless designs.

A center drain needs the floor to slope from all sides toward the middle, which works well with smaller mosaic tile. A linear drain sits along one wall or at the entry, so the floor slopes in one direction, allowing large-format tile and making curbless or low-curb entries easier.

Center drain

Common, cost-effective and often reuses existing drain location.

Linear drain at back wall

Single-plane slope, clean look, larger tile.

Linear drain at entry

Helps contain water in curbless showers.

Moving a drain is the biggest variable. In single-family homes on slab, relocation involves cutting and patching concrete. In condos, relocation is often limited because drains connect to shared stacks through the slab.

How Should a Walk-In Shower Be Waterproofed?

Short answer

Use a complete waterproofing system with a sloped floor tied to the drain, waterproof walls, careful detailing at niches, benches and valves, and a flood test before tile.

Tile and grout are not waterproof. The waterproofing layer under and behind the tile keeps water out of walls and floors. A walk-in shower needs a sloped, waterproof floor tied into the drain, waterproof walls in the wet area and careful detailing at every opening.

  • Use a complete system, such as sheet or liquid membranes or a manufacturer’s foam board system, installed per instructions
  • Pre-slope the floor so water reaches the drain instead of sitting under tile
  • Detail niches, benches, valve openings and glass anchor points carefully
  • Extend waterproofing beyond the shower in curbless or doorless designs
  • Flood test the shower floor before tile when the system allows

Moisture behind tile leads to mold and rot. The EPA’s Brief Guide to Mold, Moisture and Your Home explains why controlling moisture is the key to preventing mold indoors. In humid South Florida, a well-waterproofed shower and a working exhaust fan work together.

Different systems suit different situations. Sheet membranes bond over backer board and give a consistent thickness. Liquid membranes are rolled or brushed on in multiple coats and work well around complex shapes, but each coat needs proper thickness and cure time. Foam board systems combine the substrate and waterproofing in one product with sealed seams. Traditional mortar beds with a liner still work when built correctly but are heavier and slower. What matters most is that the contractor uses one complete system, follows the manufacturer’s instructions, and does not mix parts from different systems in ways the manufacturers do not support.

Ask to see the waterproofing before tile goes on, or ask for photos. Seams, corners, the drain connection, the curb and every pipe penetration should be sealed. A flood test, where the shower floor is plugged and filled with water for a period to check for leaks, is a simple way to confirm the work before it is covered.

Which Tile Works for Walk-In Shower Floors and Walls in Hallandale Beach?

Short answer

Porcelain is a common choice for floors and walls. Use slip-resistant or mosaic tile on the floor, larger tile on walls, and stain-resistant grout in humid conditions.

TileFloorWallsNotes
PorcelainYes, in slip-resistant finishYesDurable, low water absorption, wide range of looks
CeramicLimitedYesLighter and easier to cut; less durable underfoot
MosaicYesAccentSmall pieces follow slope and add grip; more grout
Natural stoneWith careYesNeeds sealing and gentle cleaners
Large-format panelsWith linear drainYesFewer grout lines; heavier handling

For the floor, choose a slip-resistant tile and enough grout lines or texture for grip. For walls, larger tiles reduce grout cleaning. Epoxy or high-performance grouts resist staining in humid climates. Our bathroom remodeling in Hallandale Beach page describes the tile and flooring work we do.

Which Shower Glass Options Fit Hallandale Beach Bathrooms?

Short answer

Fixed panels, hinged doors, sliding doors and framed enclosures all work. Glass is measured after tile, and hardware should resist humid air.

OptionStrengthsConsiderations
Fixed panelOpen look, no doorNeeds enough depth for splash
Hinged frameless doorClean appearanceSwing must clear toilet and vanity
Sliding framelessSaves swing spaceTrack needs cleaning
FramedLower cost, forgivingMore metal to clean

Glass is measured after tile, so it arrives one to three weeks later. Choose hardware finishes that resist humid air, and plan for regular squeegeeing to limit water spots. In condos, confirm large panels fit the service elevator and hallway.

Glass thickness and hardware affect both cost and feel. Thicker frameless glass feels solid and looks clean but needs stronger walls and careful anchoring into blocking or masonry. Ask whether the glass will have a protective coating that helps resist water spots, and confirm the door swing direction, handle height and the gap at the bottom. In bathrooms where the toilet or vanity sits close to the shower, a sliding door or a fixed panel with an open end often works better than a swinging door.

Which Shower Valves and Fixtures Make Sense in Hallandale Beach?

Short answer

Pressure-balancing or thermostatic valves, a handheld shower, controls near the entry, corrosion-resistant finishes and WaterSense fixtures make practical choices.

The valve inside the wall controls temperature and safety. A pressure-balancing valve keeps temperature stable when other fixtures run. A thermostatic valve holds a set temperature and allows higher flow to multiple outlets.

  • A handheld shower on a slide bar helps with seated showers and cleaning
  • Separate volume and temperature controls are easier for many users
  • Place controls near the entry so you can start the water without getting wet
  • Choose finishes that resist corrosion in coastal air
  • Consider WaterSense labeled showerheads and faucets for lower water use

EPA WaterSense bathroom faucet guidance explains how labeled fixtures reduce water use without sacrificing performance. Shower valve changes require plumbing work that is usually permitted.

Should You Add a Niche or Bench to a Walk-In Shower?

Short answer

Niches and benches add storage and comfort but need careful waterproofing and placement on interior walls with a slight slope to drain.

Niches hold bottles without shelves or caddies, and benches add comfort for shaving legs or sitting. Both need careful waterproofing because they create inside corners and horizontal surfaces where water collects.

Recessed niche

Placed on an interior wall, sloped slightly so water drains out.

Built-in bench

Framed or prefabricated and fully waterproofed; adds comfort and accessibility.

Fold-down seat

Takes little space and works for accessibility.

Avoid niches on exterior walls where insulation or masonry make waterproofing harder, and avoid placing a niche where the glass panel or valve will block it.

How Do You Ventilate a Walk-In Shower in Hallandale Beach’s Humid Climate?

Short answer

Use a quiet, properly sized exhaust fan on a timer or humidity control, allow replacement air, and keep the AC running to manage humidity.

Walk-in showers release steam into the whole bathroom, especially with open or doorless designs. A properly sized, quiet exhaust fan vented to the outside, where allowed, removes moisture before it condenses.

  • Size the fan for the bathroom volume
  • Use a timer or humidity sensor so it runs after showers
  • Allow replacement air with a door undercut or grille
  • In condos, use the building’s approved exhaust path
  • Keep the air conditioning running to manage humidity

Weak ventilation shows up as mildew on grout, peeling paint and musty smells. It is one of the easiest problems to prevent during a remodel.

What Lighting Works in and Around a Walk-In Shower?

Short answer

Use a wet-rated light inside the shower, face-height vanity lighting and general ceiling light, with ground-fault protection and permits where required.

Good lighting makes a shower safer and easier to clean. Use wet-rated fixtures inside the shower, and layer lighting at the vanity and ceiling. Surface-mounted LEDs work where concrete ceilings prevent recessed lights. A small night light helps at night. Lighting and fan circuits usually require a permit and must have ground-fault protection where required.

  • Wet-rated recessed or surface light inside the shower
  • Vanity lighting at face height
  • Ceiling light for general illumination
  • Night light or toe-kick lighting for safety

How Can a Walk-In Shower Support Aging in Place in Hallandale Beach?

Short answer

Add grab-bar blocking, a low or no curb, a handheld shower, a seat, slip-resistant tile and reachable controls.

Many Hallandale Beach owners plan to stay long term. A walk-in shower is the most useful aging-in-place upgrade in many homes.

  • Add blocking in walls for future grab bars
  • Choose a low curb or curbless entry
  • Install a handheld shower on a slide bar
  • Add a bench or fold-down seat
  • Use slip-resistant floor tile
  • Place controls within easy reach from outside the spray

The U.S. Access Board ADA Accessibility Standards are written for public facilities, not private homes, but many designers use their dimensions as a reference for grab-bar heights, seats and clearances.

Do You Need a Permit for a Walk-In Shower Remodel in Hallandale Beach?

Short answer

Most walk-in shower remodels need a permit because the valve, drain or supply lines change. Confirm your scope with the City of Hallandale Beach Building Division.

Most walk-in shower remodels involve plumbing work such as replacing the valve or drain, which typically requires a permit. Retiling without touching plumbing may be treated differently, but confirm with the City.

Permits for Hallandale Beach properties go through the City of Hallandale Beach Building Division, with county-level information from the Broward County Building Code Services Division. The Florida Building Code Online sets the technical standards. A permitted shower provides inspections and records that buyers and associations often value.

What Changes for Walk-In Showers in Hallandale Beach Condos?

Short answer

In condos, expect association approval, limited drain relocation, few curbless options, scheduled water shutoffs, building work hours and elevator limits for glass.

Many Hallandale Beach showers are in mid-rise and high-rise condominiums along the beach and the Intracoastal. The construction is the same, but the rules change.

  • Association approval usually comes before the City permit
  • Drains connect through the slab to shared stacks, so relocation is limited
  • Recessing the slab for curbless entries is rarely allowed
  • Water shutoffs may need building staff and advance notice
  • Work hours, elevator reservations and debris removal follow building rules
  • Glass panels must fit the service elevator

Florida’s Florida Statutes section 718.113 (The Florida Senate) governs condominiums, and each declaration sets who is responsible for which pipes and finishes. For a full walkthrough of condo rules, see Condo Bathroom Remodeling Hallandale Beach, FL: What Owners Need to Know. Our condo bathroom remodeling in Hallandale Beach page describes the service.

Before designing a condo shower, request the building’s renovation rules, approved contractor requirements, and any waterproofing or sound-control specifications. Some buildings require specific membranes, flood testing witnessed by staff, or approved underlayment beneath tile floors. Sharing these documents with contractors early lets them price the real requirements instead of assumptions, and makes bids comparable.

How Long Does a Walk-In Shower Remodel Take in Hallandale Beach?

Short answer

Construction often takes about two to four weeks, and the whole project often runs six to twelve weeks with approvals, permits and glass lead time.

PhaseTypical duration
Design, selections and estimateAbout 1 to 3 weeks
Association approval (condos)About 2 to 6 weeks, varies by building
Permit reviewVaries by City workload and scope
Demolition and rough plumbingAbout 2 to 5 days
Inspections, floor slope and waterproofingAbout 3 to 7 days, including cure times
Tile and groutAbout 4 to 8 days
Fixtures and trimAbout 1 to 2 days
Glass measurement, fabrication and installAbout 1 to 3 weeks after tile

Typical planning durations, not a fixed schedule.

Construction often takes about two to four weeks, but the total project from first call to finished glass often takes six to twelve weeks once approvals, permits and lead times are included. Order tile, valves and drains early so they are on site before demolition.

Cure times are the part of the schedule owners most often underestimate. Mortar beds, waterproofing membranes and grout each need time to cure before the next step, and rushing them risks failures later. Many manufacturers specify cure times between coats and before flood testing. A schedule that looks fast because it skips cure time is a warning sign, not an advantage.

During construction, the bathroom will be unavailable. If it is the only bathroom, plan where you will shower and how long it will be out of service. In condos, work hours and elevator reservations also shape the pace, so a project that would take two weeks in a house may take three in a high-rise.

Planning a Walk-In Shower in Hallandale Beach?

Share a few photos and tell us how you use the bathroom. 18 Construction Management Group can walk the space, explain the entry and drain options that fit, and prepare a written estimate that lists waterproofing, glass and assumptions. Call (954) 544-0845 or view our Google Business Profile.

What Hidden Problems Show Up When Removing an Old Tub or Shower?

Short answer

Water damage, thick mortar beds, corroded valves and pipes, drain problems, mold and uneven walls are common surprises.

1

Water damage

Rotted framing or damaged subfloor from years of small leaks.

2

Old mortar beds

Thick, heavy shower floors that take longer to remove.

3

Corroded valves and pipes

Old valves and galvanized or cast-iron lines that need replacement.

4

Drain problems

Cracked or poorly pitched drain lines.

5

Mold

Growth behind tile from failed grout or missing waterproofing.

6

Out-of-plumb walls

Walls that need shimming or new board before tile.

A good estimate explains how these are handled and priced. Keep a contingency reserve so discoveries do not stall the project.

Demolition day is when a shower project reveals its real condition. Once the tile and backer come off, the crew can see whether the framing is sound, whether the old shower pan leaked, and whether the valve and supply lines are worth keeping. In many older Hallandale Beach homes and buildings, the original shower was built over a thick mortar bed with a liner that may have failed years ago. Water that escaped slowly can soften wood framing in single-family homes or stain and weaken the concrete in condos. None of that is visible during the estimate visit, which is why a written plan for hidden conditions matters.

Ask the contractor how they document what they find. A clear practice is to stop, photograph the problem, explain the options and price the repair in writing before continuing. That keeps decisions in your hands and avoids surprise invoices at the end. If mold is found, the extent determines the response: small areas on framing are often cleaned and dried, while larger growth may call for a specialist. Fixing the moisture source is always the first step, and the new waterproofing system is what keeps the problem from returning.

Old valves deserve special attention. If the existing valve is a single-handle unit with no pressure balancing, replacing it during the remodel is usually sensible, because the wall is already open and the new valve improves comfort and safety. Trying to save an old valve to reduce cost often means opening finished tile later when parts are no longer available.

How Do You Choose a Contractor for a Walk-In Shower in Hallandale Beach?

Short answer

Verify licenses and insurance, confirm permits, ask about waterproofing and flood testing, review past showers and get a written itemized estimate.

  • Verify licenses through the Florida DBPR license search
  • Confirm insurance and that the company will pull permits
  • Ask which waterproofing system they use and whether they flood test
  • Ask for photos of finished showers and slope details
  • Request a written, itemized estimate
  • Ask how hidden conditions and change orders are priced
  • Confirm who handles association paperwork in condos

Florida’s Florida Statutes section 489.128 (The Florida Senate) governs contractor licensing. A license check is a basic step that protects you if something goes wrong. Ask each contractor the same questions so answers are comparable.

Beyond licensing, look at how a contractor explains the work. A good contractor can describe in plain language how they will slope the floor, which waterproofing system they use, how they detail the niche and valve openings, and how they protect the rest of your home during demolition. If answers are vague or every question leads back to finish selections, that is a sign to keep comparing.

References are most useful when they are recent and similar to your project. Ask for a homeowner whose shower was finished a year or more ago, because that is long enough to reveal leaks, cracked grout or glass issues. For condo projects, ask whether the contractor has worked in your building or similar buildings, and whether they are familiar with association paperwork and building staff coordination.

Finally, read the contract carefully. It should match the estimate, list the payment schedule tied to completed phases, describe how change orders are priced and approved, and state the warranty terms the contractor offers. A contract that is shorter than the estimate is usually missing something.

What Should a Walk-In Shower Estimate Include?

Short answer

It should list demolition, plumbing, slope and waterproofing, tile, glass, fixtures, electrical and ventilation, permits, schedule, payments and exclusions.

LineWhat to look for
Demolition and protectionRemoval, disposal, floor and hallway protection
PlumbingValve type, drain type and location, supply changes
Floor slope and waterproofingSystem named, flood testing, detailing at niches and benches
TileSquare footage, allowance or selection, pattern, grout type
GlassType, thickness, hardware, measurement after tile
FixturesShowerhead, handheld, trim, supplied by whom
Electrical and ventilationFan, lighting, circuits
Permits and inspectionsWho pulls permits and schedules inspections
Schedule, payments and exclusionsPhases, draws, change orders, what is not included

For a deeper look at how proposals should be structured, see Kitchen Remodeling Hallandale Beach, FL: What Should Be Included in an Estimate?. Comparing lines side by side shows which bid includes the full scope.

Allowances deserve a close look. Many shower estimates include an allowance for tile, glass or fixtures instead of exact selections. An allowance that is too low makes a bid look cheaper but leads to overruns once you choose real products. Ask what each allowance would buy in practical terms, such as the type of porcelain or the glass thickness and hardware, so you can judge whether it is realistic for what you want.

Also confirm what happens around the shower. A walk-in shower often affects nearby finishes: the bathroom floor where it meets a low curb or curbless entry, the drywall and paint around new glass, the ceiling where a new fan or light goes, and the door if the entry changes. If these are excluded, budget for them separately. When two estimates differ significantly, ask each contractor to explain their scope line by line rather than choosing the lowest total.

How Do You Maintain a Walk-In Shower in Coastal Humidity?

Short answer

Squeegee, run the fan, use gentle cleaners, reseal stone and cement grout, clean drains and check caulk yearly.

  • Squeegee glass and walls after showers
  • Run the fan for 20 to 30 minutes after showering
  • Use pH-neutral cleaners, especially on stone
  • Reseal natural stone and cement grout as recommended
  • Clean the linear drain cover and hair trap regularly
  • Inspect caulk joints at corners and the glass once a year

Simple habits keep a walk-in shower looking new and prevent mildew. Most maintenance takes a few minutes each week.

Coastal air carries salt and moisture, so hardware and finishes in Hallandale Beach bathrooms age faster than in drier climates. Wipe metal fixtures dry occasionally and avoid abrasive cleaners that strip protective finishes. If glass develops hard-water spots, a mild vinegar solution or a cleaner recommended by the glass fabricator usually removes them, but avoid acidic cleaners on natural stone.

Watch for early warning signs: grout that stays dark long after a shower, caulk that pulls away from corners, a musty smell, or loose tiles. These are easier and cheaper to address early. A well-built shower with good waterproofing rarely leaks, but small maintenance items like caulk joints are expected to need attention over time.

How Does Hurricane Season Affect Walk-In Shower Projects in Hallandale Beach?

Short answer

Storms can delay deliveries and inspections, so allow schedule cushion from June through November and plan how the open work area will be secured.

Atlantic hurricane season runs June through November. Storms can delay material deliveries and inspections. Plan extra time for summer and fall projects, keep materials secured and confirm how the contractor protects an open bathroom if a storm approaches. Ready.gov hurricane preparedness guidance offers general preparedness guidance.

For owners who leave Hallandale Beach for part of the year, timing matters. Some prefer to schedule work while they are away, which requires clear communication, photo updates and a plan for inspections and building access. Others prefer to be present for key decisions such as tile layout and niche placement. Either approach works with planning. If a storm threatens during construction, confirm that water is not left shut off longer than necessary, that debris is removed, and that the bathroom can be secured with materials stored safely.

Does a Walk-In Shower Help Resale in Hallandale Beach?

Short answer

A well-built walk-in shower can appeal to many buyers, but keep at least one tub if families are likely buyers.

Many buyers appreciate a clean, updated walk-in shower, especially in a market with many retirees and seasonal residents. Value depends on the overall home, the neighborhood and whether at least one tub remains. Avoid removing the only tub if resale to families is likely. For more context, see Bathroom Remodeling Hallandale Beach, FL: Why a Renovated Bathroom Can Boost Home Value.

Buyer preferences vary. Many buyers in Hallandale Beach and nearby communities appreciate a step-in shower with modern glass and tile, and a shower designed with accessibility in mind can broaden appeal to older buyers. Families with young children, however, often look for at least one tub. If the home has two or more bathrooms, converting the primary bath tub to a walk-in shower while keeping a tub in a guest bath is a common balance.

Quality of work matters as much as the design. Buyers and inspectors notice cracked grout, poorly fitting glass and signs of past leaks. Permits and documented inspections help show that the work was done properly, which can make a sale smoother and support the value of the remodel.

How Can You Control a Walk-In Shower Budget?

Short answer

Keep the drain in place, use porcelain, choose simpler glass, limit niches, decide early and keep a contingency.

1

Keep the drain in place

Avoids slab work.

2

Choose porcelain over stone

Durable and easier to maintain.

3

Pick a framed or semi-frameless enclosure

Lower cost than heavy custom glass.

4

Limit niches

One well-placed niche is enough for many households.

5

Decide selections early

Prevents change orders and delays.

6

Keep a contingency

Covers hidden conditions without stalling the work.

Spend on what you cannot see later, such as waterproofing and the valve, and save on finishes you can change later.

Phasing can also help. If the full bathroom is not in the budget this year, start with the shower and plan the vanity and flooring later, while installing what the future phase will need now, such as grab-bar blocking, the new fan circuit and the floor transition. That way the second phase does not undo work from the first.

Be cautious about savings that move risk into the walls. Skipping a flood test, using a basic liner instead of a complete waterproofing system, or reusing an old valve may save a little now but costs far more if the shower leaks. The money spent on what you cannot see is usually the strongest protection for everything you can.

Get your selections finalized before demolition. Changes during construction, such as switching tile after the floor slope is set for a different drain or adding a niche after waterproofing is done, cost time and money. A short design meeting to confirm the drain, valve, niche locations, tile layout and glass style before work starts prevents most changes.

Common Myths About Walk-In Showers in Hallandale Beach

Short answer

Common myths: tile is waterproof, doorless always works, curbless is always possible, removing a tub always hurts resale, showers are quick, and Cost vs Value figures are quotes.

1

Myth: Tile is waterproof

The membrane under the tile keeps water out.

2

Myth: Doorless always works

Shallow showers splash without a door.

3

Myth: Curbless is always possible

Slabs and condo rules often limit it.

4

Myth: Removing a tub always hurts resale

Value depends on the home and whether another tub remains.

5

Myth: A shower is a quick weekend job

Slope, waterproofing, cure times and glass take weeks.

6

Myth: Cost vs Value figures are quotes

They are model averages for comparison only.

A Remodeling Company Serving Hallandale Beach Homeowners

18 Construction Kitchen and Bathroom Remodel Management Group LLC, known as 18 Construction Management Group, is a kitchen and bathroom remodeling and project management company serving Hallandale Beach, Golden Beach, Aventura, Sunny Isles Beach, Hollywood and the wider Broward and Miami-Dade coast. If you are planning a walk-in shower, it is a local remodeling company to consider and worth comparing alongside others.

Bathroom services include full bathroom remodeling, walk-in showers, tub-to-shower conversions, condo bathrooms, vanities, tile, flooring, fixtures and lighting, with project management to coordinate the trades. The company also handles kitchen remodeling. The approach is practical, well-planned remodeling.

Phone: (954) 544-0845
Website: 18projectsm.com
Service areas: Aventura, Sunny Isles Beach, Golden Beach, North Miami Beach, Hallandale Beach, Hollywood, North Miami, Miami Beach
Google Business Profile: View on Google Maps

18 Construction Management Group is a service-area business, so the team comes to you. Call to discuss your shower and ask for a written estimate that lists scope, waterproofing and assumptions.

Frequently Asked Questions About Walk-In Shower Remodeling in Hallandale Beach

How much does a walk-in shower remodel cost in Hallandale Beach?

Planning ranges run about $10,000 to $20,000 for a refresh, $15,000 to $35,000 for a tub-to-shower conversion and $25,000 to $50,000 or more for a large primary shower. These are planning ranges, not quotes.

What does the Cost vs Value Report say about Miami bathrooms?

The 2025 report lists Miami at $25,565 for a midrange bath remodel, $40,234 for a universal-design remodel and $79,971 for an upscale remodel.

Do I need a permit for a walk-in shower in Hallandale Beach?

Usually yes, when the valve, drain or supply lines change. Confirm your scope with the City of Hallandale Beach Building Division.

Can I convert my tub to a walk-in shower?

Often yes. The drain usually stays near the existing tub drain, and the shower is built in the tub’s footprint.

Is a curbless shower possible on a concrete slab?

Sometimes. It may require recessing the slab or raising the bathroom floor, and condos often restrict slab work.

Which drain is better, center or linear?

Center drains suit mosaic floors and often reuse the existing location. Linear drains allow one-way slope and large tile.

How big should a walk-in shower be?

A tub alcove conversion is usually about 60 by 30 to 36 inches. Primary showers are often larger, with more depth for doorless designs.

Do I need a door on a walk-in shower?

Not always. Doorless designs need enough depth to contain splash; shallow showers usually need a door or panel.

How long does a walk-in shower remodel take?

Construction often takes about two to four weeks, and the full project often runs six to twelve weeks including approvals and glass.

Can I remodel a walk-in shower in a Hallandale Beach condo?

Yes, with association approval, building work rules and limits on drain relocation and slab work.

How do I prevent mold in a walk-in shower?

Use a complete waterproofing system, a properly sized exhaust fan and regular cleaning and drying.

Does 18 Construction Management Group publish fixed walk-in shower prices?

No. The figures in this guide are educational planning ranges. To request a written estimate, call 18 Construction Management Group at (954) 544-0845.

Find 18 Construction Management Group Near Hallandale Beach on Google Maps

18 Construction Management Group is a service-area remodeling business. The map below shows the Google Business Profile; there is no showroom address to visit, so the easiest way to start is to call (954) 544-0845.

Open the 18 Construction Management Group Google Business Profile

Ready to Plan Your Hallandale Beach Walk-In Shower?

Decide how you want to use the shower, gather photos and building rules if you live in a condo, and invite a contractor to put scope, waterproofing and glass in writing. Call 18 Construction Management Group at (954) 544-0845 to request a written estimate.

Call (954) 544-0845View on Google Maps

18 Construction Management Group · Serving Aventura, Sunny Isles Beach, Golden Beach, North Miami Beach, Hallandale Beach, Hollywood, North Miami, Miami Beach

Scroll to Top